 |
DZ47-125
CNCSGK
| Quantity: | |
|---|---|
Appllication
DZ47-125 high breaking capacity circuit breaker is used in AC 50Hz or 60Hz,single pole 240V.2,3,4,poles 415V,for protecting the circuit which overload and short circuit may take place.It can he used in lighting and electric motor distribution system Meantime it is applicable to unfrequently switch the electric apparatus and light circuit under
Technical Data
| Rated current In | 63,80,100,125A |
| Poles | 1P,1P+N,2P,3P,3P+N,4P |
| Rated voltage Ue | 240/415V~ |
| Insulation voltage Ui | 500V |
| Rated frequency | 50/60Hz |
| Rated breaking capacity | 10,000A |
| Energy limiting class | 3 |
| Rated impulse withstand voltage(1.5/50) Uimp | 4,000V |
| Dielectric test voltage at ind. Freq. for 1 min | 2kV |
| Pollution degree | 2 |
| Thermo-magnetic release characteristic | 8-12In |
| Mechanical Features | |
| Electrical life | 4,000 Cycles |
| Mechanical life | 10,000 Cycles |
| Contact position indicator | Yes |
| Protection degree | IP20 |
| Reference temperature for setting of thermal element | 30℃ |
| Ambient temperature (with daily average≤35℃) | -5℃~+40℃ |
| Storage temperature | -25℃~+70℃ |
| Installation | |
| Terminal connection type | Cable/Pin-type busbar |
| Terminal size top/bottom for cable | 50mm 18-2AWG |
| Terminal size top/bottom for busbar | 50mm 18-2AWG |
| Tightening torque | 3.5Nm 30In-lbs |
| Mounting | On DIN rail EN60715(35mm) by means of fast clip device |
| Connection | From top and bottom |
Appllication
DZ47-125 high breaking capacity circuit breaker is used in AC 50Hz or 60Hz,single pole 240V.2,3,4,poles 415V,for protecting the circuit which overload and short circuit may take place.It can he used in lighting and electric motor distribution system Meantime it is applicable to unfrequently switch the electric apparatus and light circuit under
Technical Data
| Rated current In | 63,80,100,125A |
| Poles | 1P,1P+N,2P,3P,3P+N,4P |
| Rated voltage Ue | 240/415V~ |
| Insulation voltage Ui | 500V |
| Rated frequency | 50/60Hz |
| Rated breaking capacity | 10,000A |
| Energy limiting class | 3 |
| Rated impulse withstand voltage(1.5/50) Uimp | 4,000V |
| Dielectric test voltage at ind. Freq. for 1 min | 2kV |
| Pollution degree | 2 |
| Thermo-magnetic release characteristic | 8-12In |
| Mechanical Features | |
| Electrical life | 4,000 Cycles |
| Mechanical life | 10,000 Cycles |
| Contact position indicator | Yes |
| Protection degree | IP20 |
| Reference temperature for setting of thermal element | 30℃ |
| Ambient temperature (with daily average≤35℃) | -5℃~+40℃ |
| Storage temperature | -25℃~+70℃ |
| Installation | |
| Terminal connection type | Cable/Pin-type busbar |
| Terminal size top/bottom for cable | 50mm 18-2AWG |
| Terminal size top/bottom for busbar | 50mm 18-2AWG |
| Tightening torque | 3.5Nm 30In-lbs |
| Mounting | On DIN rail EN60715(35mm) by means of fast clip device |
| Connection | From top and bottom |
